 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power Transistors 2SA0794, 2SA0794A (2SA794, 2SA794A) Silicon PNP epitaxial planar type Unit: mm For low-frequency output driver Complementary to 2SC1567 and 2SC1567A I Features * High collector to emitter voltage VCEO * Optimum for the driver stage of low-frequency and 40 W to 100 W output amplifier * TO-126B package which requires no insulation plate for installation to the heat sink 8.0+0.5 -0.1 3.160.1 3.80.3 11.00.5 3.20.2 1.90.1 I Absolute Maximum Ratings TC = 25C Parameter Collector to base voltage Collector to emitter voltage 2SA0794 2SA0794A 2SA0794 2SA0794A VEBO ICP IC PC Tj Tstg VCEO Symbol VCBO Rating -100 -120 -100 -120 -5 -1 - 0.5 1.2 150 -55 to +150 V A A W C C V Unit V 0.750.1 4.60.2 0.50.1 0.50.1 2.30.2 3 1.760.1 16.01.0 1 2 1: Emitter 2: Collector 3: Base TO-126B Package Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature I Electrical Characteristics TC = 25C Parameter Collector to emitter voltage Emitter to base voltage Forward current transfer ratio 2SA0794 2SA0794A VEBO hFE1 * hFE2 Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE1 Q 90 to 155 R 130 to 220 VCE(sat) VBE(sat) fT Cob IE = -1 A, IC = 0 VCE = -10 V, IC = -150 mA VCE = -5 V, IC = -500 mA IC = -500 mA, IB = -50 mA IC = -500 mA, IB = -50 mA VCB = -10 V, IE = 50 mA, f = 200 MHz VCB = -10 V, IE = 0, f = 1 MHz Symbol VCEO Conditions IC = -100 A, IB = 0 Min -100 -120 -5 90 50 160 100 - 0.2 - 0.85 120 20 30 - 0.4 -1.2 V V MHz pF 220 V Typ Max Unit V Note.) The Part numbers in the Parenthesis show conventional part number. 3.050.1 1 2SA0794, 2SA0794A PC T a 6 Power Transistors IC VCE -1.2 TC=25C -1.0 -18mA IB=-20mA -16mA -12mA -14mA -10mA -8mA -6mA -4mA -1.0 -1.2 VCE=-10V TC=25C IC I B Collector power dissipation PC (W) 5 (1)With a 100x100x2mm Al heat sink (2)Without heat sink Collector current IC (A) 4 -0.8 Collector current IC (A) -0.8 3 (1) -0.6 -0.6 2 (2) 1 -0.4 -2mA -0.4 -0.2 -0.2 0 0 20 40 60 80 100 120 140 160 180 0 0 -2 -4 -6 -8 -10 -12 0 0 -2 -4 -6 -8 -10 -12 -14 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base current IB (mA) IC VBE Collector to emitter saturation voltage VCE(sat) (V) -0.6 VCE=-10V -0.5 -3 VCE(sat) IC Base to emitter saturation voltage VBE(sat) (V) IC/IB=10 -3 VBE(sat) IC IC/IB=10 Collector current IC (A) Ta=125C -0.4 -25C -1 -1 TC=-25C 100C 75C -0.3 25C -0.1 -0.3 TC=100C -25C -0.3 25C -0.1 -0.2 -0.1 -0.03 -0.03 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -0.01 -0.01 -0.03 -0.1 -0.3 -1 -0.01 -0.01 -0.03 -0.1 -0.3 -1 Base to emitter voltage VBE (V) Collector current IC (A) Collector current IC (A) hFE IC 200 3000 VCE=-10V VCB=-10V 180 f=200MHz TC=25C 160 140 120 100 80 60 40 20 10 -0.01 0 -0.03 -0.1 -0.3 -1 1 3 fT IE 50 Cob VCB Collector output capacitance Cob (pF) IE=0 f=1MHz TC=25C 40 Forward current transfer ratio hFE 1000 Transition frequency fT (MHz) 300 TC=100C 25C 30 100 -25C 20 30 10 10 30 100 0 -1 -3 -10 -30 -100 Collector current IC (A) Emitter current IE (mA) Collector to base voltage VCB (V) 2 Power Transistors ICEO Ta 105 VCE=-20V 104 2SA0794, 2SA0794A ICBO Ta VCB=-20V Area of safe operation (ASO) -10 -3 Single pulse TC=25C 103 Collector current IC (A) 104 -1 -0.3 -0.1 ICP IC t=1s t=10ms ICEO (Ta) ICEO (Ta=25C) 103 ICBO (Ta) ICBO (Ta=25C) 102 102 -0.03 -0.01 -0.003 10 10 1 0 20 40 60 80 100 120 140 160 180 200 1 0 20 40 60 80 100 120 140 160 -0.001 -1 -3 -10 -30 -100 -300 -1000 Ambient temperature Ta (C) Ambient temperature Ta (C) Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SA0794A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |